Cart
Our 3 ply panel filters are constructed using 100% polyester fibers. Each panel filter has a specific "formula" for blending different size fibers to form the relative layers. These layers are designed to capture large particles throughout the entering layer and progressively smaller particles through the remaining layers. A tackifier is applied in-between the final two layers to stabilize any migrating particles and prevent the discharge of particles from the filter. Using the three principles of filtration "Impingement, Straining, and Interception," this construction produces an extremely high dust holding capacity and a MERV 11 rating.
Material: | 100% Polyester, 9 gauge galvanized wire frame |
---|---|
Ply: | 3 |
Nominal Depth: | 1" to 4" |
Actual Depth: | 1½" |
Made: | Made in the USA |
MERV rating: | MERV 11 |
The easiest way to make sure you order the correct size is to measure your current air handler's track length and height with a tape measure. Make sure to measure the entire filter track. The length and height of the panel filter will have a tolerance of +1" -2" between each panel. What this means is your size will be up to 2" bigger between panels. This tolerance is typical of all link panel filters, given the material and construction of the link panel filters there is overlap. Panels can be folded and be pushed together giving your air handler a tighter seal. | |
Ring and Link Panels are custom made and require 5 business days to manufacture. | |
Ring and Link Panels are NON-RETURNABLE. Make sure you enter the correct measurements before buying. | |
A single ring panelhas a minimum size of 12" x 20" or a maximum of 25" x 25". | |
If a dimension exceeds the length of 25" the panel filter will be made of multiple links. | |
Prices shown are list prices, if you have any applicable discounts, the discounted price will be shown after you add the product to your cart. |
Only users who bought product can write review.